SuperSpeed SuperCache v5.0.524.0 | 13.37 Mb
SuperCache breaks the disk I/O bottleneck by using the computer's RAM to hold or contain the most frequently used disk data. This 'container' is referred to as a cache. With SuperCache, as a program sends and receives disk data, the most frequently used data is read from and written to RAM – not the hard drive – thus accelerating the program's performance. SuperCache implements our patented block-level cache technology to increase performance above that of the operating system’s file-level cache.
New Interface
SuperCache 5 now has a more user friendly and informative interface.
* Overview of available storage drives in system
* Caching graph showing 4 performance items
* Configure SuperCache by right clicking a volume
* Automatic configuration of boot drive (usually C:) during installation.
Added Feature called "Mirror Mode"
SuperCache Mirror Mode (formerly a separate product called SuperVolume) allows the user to duplicate an entire volume/partition into RAM. Learn more about Mirror Mode.
Quick start instructions:
There are two ways to configure SuperCache 5(SC5) either from Graphical User Interface(GUI) or via the Command Line Interface(CLI). SuperCache will be automatically enable on the boot volume (usually C:) if this option was selected during installation.
To configure or modify caching from the GUI
1). Double click the desktop icon.
2). Select a volume
3). Select either the first menubar icon OR Action -> Cache
- OR -
To access SC5 from the CLI
1). Open a Command Prompt with Administrative privileges
2). Type "vfcfg -help" will provide an overview of the command line syntax.
SYSTEM REQUIREMENTS :
• Windows 7 32 & 64-bit
• Windows Vista 32 & 64-bit
• Windows XP Professional, 32 & 64-bit
• Windows 2000 is NOT supported
Processor (CPU) Support
• 1 G Hz processor or higher
• All Intel and AMD Pentium-class platforms
• All Intel 64-bit processor families (except Itanium)
• All AMD 64-bit processor families
• All SMP (i.e. number of CPUs) configurations of the above that are supported by Windows™.
Operating system edition Maximum
• RAM Approx.% available for cache CPUs*
• Windows 7 32-bit(x86) 4 GB 50% 2
• Windows 7 64-bit(x64) 8-192 GB 75-95% 2
• Windows Vista 32-bit(x86) 4 GB 50% 2
• Windows Vista 64-bit(x64) 8-128 GB 50%-95% 2
• Windows XP Professional 32-bit(x86) 4 GB 75% 2
• Windows XP Professional 64-bit(x64) 128 GB 95% 2
*Socket limit that the operating system supports.
Install Notes :
1. Install the program but do not restart yet.
2. Copy the keygen to prog dir, i.e. "C:\Program Files\SuperSpeed\SuperCache\".
3. Run the keygen, and choose "SuperCache" then Patch the driver, and restart.
4. When Windows starts, navigate to prog dir, and run the keygen.
5. Choose "SuperCache" and click "Generate" to get your key file.
6. From your desktop, run "SuperCache" and click "File" -> "Licensing". Then click "Update" and "Browse" to your key file that has been generated in prog dir, and apply it.
7. DONE!
New Interface
SuperCache 5 now has a more user friendly and informative interface.
* Overview of available storage drives in system
* Caching graph showing 4 performance items
* Configure SuperCache by right clicking a volume
* Automatic configuration of boot drive (usually C:) during installation.
Added Feature called "Mirror Mode"
SuperCache Mirror Mode (formerly a separate product called SuperVolume) allows the user to duplicate an entire volume/partition into RAM. Learn more about Mirror Mode.
Quick start instructions:
There are two ways to configure SuperCache 5(SC5) either from Graphical User Interface(GUI) or via the Command Line Interface(CLI). SuperCache will be automatically enable on the boot volume (usually C:) if this option was selected during installation.
To configure or modify caching from the GUI
1). Double click the desktop icon.
2). Select a volume
3). Select either the first menubar icon OR Action -> Cache
- OR -
To access SC5 from the CLI
1). Open a Command Prompt with Administrative privileges
2). Type "vfcfg -help" will provide an overview of the command line syntax.
SYSTEM REQUIREMENTS :
• Windows 7 32 & 64-bit
• Windows Vista 32 & 64-bit
• Windows XP Professional, 32 & 64-bit
• Windows 2000 is NOT supported
Processor (CPU) Support
• 1 G Hz processor or higher
• All Intel and AMD Pentium-class platforms
• All Intel 64-bit processor families (except Itanium)
• All AMD 64-bit processor families
• All SMP (i.e. number of CPUs) configurations of the above that are supported by Windows™.
Operating system edition Maximum
• RAM Approx.% available for cache CPUs*
• Windows 7 32-bit(x86) 4 GB 50% 2
• Windows 7 64-bit(x64) 8-192 GB 75-95% 2
• Windows Vista 32-bit(x86) 4 GB 50% 2
• Windows Vista 64-bit(x64) 8-128 GB 50%-95% 2
• Windows XP Professional 32-bit(x86) 4 GB 75% 2
• Windows XP Professional 64-bit(x64) 128 GB 95% 2
*Socket limit that the operating system supports.
Install Notes :
1. Install the program but do not restart yet.
2. Copy the keygen to prog dir, i.e. "C:\Program Files\SuperSpeed\SuperCache\".
3. Run the keygen, and choose "SuperCache" then Patch the driver, and restart.
4. When Windows starts, navigate to prog dir, and run the keygen.
5. Choose "SuperCache" and click "Generate" to get your key file.
6. From your desktop, run "SuperCache" and click "File" -> "Licensing". Then click "Update" and "Browse" to your key file that has been generated in prog dir, and apply it.
7. DONE!
0 komentar:
Posting Komentar